Capitalization Rate Build Up Method: How Appraisers Derive a Cap Rate
The capitalization rate build up method, band of investment and market extraction, with worked numbers so you can defend the rate to an appraiser.
By the CapRateCalculator.co team
The capitalization rate build up method derives a cap rate from its parts, starting with a risk-free rate and adding a premium for each risk of owning property, instead of reading the rate off a comparable sale. Appraisers use it next to two other methods, band of investment and market extraction, to support an overall capitalization rate when sales data is thin or when a lender disputes the number.
So what is a capitalization rate based on? Three things: the cost of money, the risk of the specific property, and what buyers actually paid for similar income.
Most pages treat the rate as something you look up, including the overview of the yield that prices rental property. This guide runs the other direction.
What is capitalization rate in appraisal?
In appraisal the capitalization rate is the divisor in the income approach. One year of net operating income divided by a rate gives value. Appraisers call the result the overall rate, or OAR, because it covers the whole property rather than the debt or the equity alone.

Everything hard about the income approach lives in that one rate.
Here is the income side, using the standard example on this site. A $500,000 house rents for $4,000 a month, or $48,000 a year. Allow 5% vacancy and effective gross income is $45,600. Taxes run $6,000, insurance $2,500, and 18% of collected income covers maintenance, reserves and management, about $8,208. Expenses total $16,708, so NOI is $28,892. At the $500,000 price that is a 5.78% cap rate.
The arithmetic of the division is simple. Picking the rate is the work.
Starting from the risk-free rate and adding risk premiums
The build up method, sometimes called the summation method, stacks layers. You begin with a rate you can look up and add what property asks of you that a Treasury bond does not.

| Layer | What it covers | Typical add |
|---|---|---|
| Risk-free rate | The 10-year Treasury yield | Whatever it is trading at |
| Illiquidity | Months to sell, closing costs | 0.5 to 1.5 points |
| Management burden | Your time, or a fee if you hire it out | 0.5 to 1.5 points |
| Property and tenant risk | Vacancy, repairs, a tenant who stops paying | 1 to 2 points |
| Recapture | Getting your capital back over the building’s remaining life | Depends on the building |
Those ranges are appraiser judgment, not a published table. Different appraisers defend different layers, and the total matters more than the split.
With the 10-year Treasury at 4.25%, a point for illiquidity, a point for management and 1.5 points for property risk build to 7.75%.
Recapture is the layer people forget. A bond returns your principal at maturity. A building wears out, so part of the rate has to buy your money back.
Band of investment: blending the mortgage constant and the equity dividend rate
Band of investment builds the rate from how the deal gets paid for. You weight the lender’s required return and the buyer’s required return by their share of the price.
Overall rate = (loan-to-value x mortgage constant) + (equity share x equity dividend rate)
The mortgage constant is annual debt service divided by the loan balance, so it folds principal and interest into one rate. A 30-year loan at 7% has a constant near 8.0%. The mortgage constant table has the rest of the combinations.
Take 75% financing at that rate and an equity buyer who wants a 6% cash return in year one:
- Debt: 0.75 x 8.0% = 6.00%
- Equity: 0.25 x 6.0% = 1.50%
- Overall rate: 7.50%
That is what a 7.5% cap rate means in practice. The method is honest about where cap rates come from in a financed market, and the rate it produces moves every time loan terms move.
Market extraction: pulling cap rates out of comparable sales
Market extraction, also called derivation from comparable sales, is the method appraisers trust most when the data exists. Divide each comparable’s NOI by its sale price and you get the rate buyers actually used.
The trap is the NOI. You have to rebuild each comp’s income on your own expense assumptions, not the seller’s. A listing with no reserves, no management fee and last year’s tax bill shows too much NOI and too low a cap rate. That is one of the common cap rate mistakes, and it can shift an extracted rate by a point or more.
If three clean comps extract at 5.6%, 5.9% and 6.1%, the 5.78% on our example property is supported. If they extract near 7%, the $500,000 price needs an explanation.
Which capitalization rate method fits which situation
- Market extraction when you have three or more recent sales of similar property and can verify their income. This is the primary method.
- Band of investment when financing drives the market and the comps are stale. Lender terms are current even when sales are not.
- Build up when the property is unusual, the market is thin, or you need to show your reasoning layer by layer.
Appraisers rarely rely on one. They derive two or three rates and reconcile them, leaning on whichever had the best data. The three approaches to value work the same way: several indications, one reconciled conclusion.
Sanity-checking the rate you built
Turn the rate back into a price. That is the fastest check there is.
Our $28,892 of NOI is worth about $385,200 at a 7.5% rate, $481,500 at 6%, and $500,000 at 5.78%. Moving the rate one point moved the value by roughly $95,000 on identical income.
So if band of investment says 7.5% and the house is listed at $500,000, that gap is information. Either the built rate is too conservative for this market, or buyers are paying for rent growth a first-year rate cannot see, or the price is high.
Round numbers help as well. $30,000 of NOI on a $500,000 price is a flat 6%, which is a handy anchor when you are checking whether a built rate is in the right neighborhood.
Two last checks before you sign off. The NOI you divide has to rest on the same expense assumptions as the NOIs that produced your rate. And no version of the rate should have debt service sitting in the expense line.
Build the rate, then test it
The Cap Rate Calculator on the home page takes a price plus the rent and expense lines and returns the NOI and the cap rate. Build your rate with one of the three methods above, then run a real property through the calculator and see whether the income supports it.
Frequently asked questions
What is the capitalization rate build up method?
It derives a cap rate by stacking layers instead of reading one off a sale. You start with a risk-free rate, usually the 10-year Treasury yield, then add premiums for illiquidity, management burden, property and tenant risk, and recapture of your capital over the building's remaining life. The sum is the rate you divide into net operating income.
What is the band of investment method?
It builds an overall rate from how the purchase is paid for. Multiply the loan-to-value ratio by the mortgage constant, multiply the equity share by the equity dividend rate, and add the two. At 75% financing with a constant of 8% and a 6% equity return, the overall rate is 7.5%.
How do appraisers extract a cap rate from comparable sales?
They divide each comparable's net operating income by its sale price. The work is in the income, not the division. Each comp's NOI has to be rebuilt on consistent expense assumptions, including vacancy, reserves and management. Skip those and the extracted rate comes out too low by a point or more.
What is an overall capitalization rate?
The overall rate, or OAR, is the single rate that converts a property's full net operating income into a value for the whole property. It covers debt and equity together, which is why it is comparable across buyers with different loans. A $28,892 NOI at a 6% OAR values the property near $481,500.